Startup Setup: Connect your computer to the laser cutting machine controller, power on the controller, and turn on the computer.
Open the laser cutting machine software interface. In the "File" menu, select "Device Settings." Configure the laser cutting machine's model, port, and other information, and test the connection.
In the "File" menu, select "Material Library Settings." Add, delete, or modify materials in the material library as needed for later use.
File Import: In the software interface, select the "File" menu and click "Open" to select the file to be cut. Common formats such as DXF, PLT, and AI are supported.
Adjust the file's position, size, and shape. You can perform operations such as scaling, rotation, and mirroring to optimize the cutting process.
Parameter Settings: In the software interface, select the "Parameter Settings" menu to set the cutting parameters, including cutting speed, acceleration, laser power, and applied force.
Adjust the values of each parameter according to different materials and cutting requirements to achieve the best cutting results.
File Import: In the software interface, select the "Parameter Settings" menu to set the cutting parameters, including cutting speed, acceleration, laser power, and applied force.
Parameter Adjustment: Adjust the values of each parameter according to different materials and cutting requirements to achieve the best cutting results.
Cutting Process
Click the "Start Cutting" button in the software interface. The controller will begin cutting according to the set parameters. At this point, the workpiece needs to be placed on the laser cutting machine's worktable.
During the cutting process, the monitoring software can display the real-time cutting status, allowing for timely adjustments and interventions to ensure cutting quality.
After cutting is complete, turn off the laser cutting machine, remove the workpiece, and clean the work area for the next cutting operation.
