General Purpose Lathe Controller

General Purpose Lathe Controller is a high cost-effective CNC General Purpose Lathe Controller developed by TOMATECH TECHNOLOGY CO.,LTD.

TOMATECH was Founded in 2014, . It is a leading technology company dedicated to designing, manufacturing, marketing affordable high performance motion control products.

Control Axes:
1. TAC2000T series :Control axes: 2 -3 axes (X, Z, Y) ,Pulse + direction signals
2. TAC2000TB series :2~5 axes (X,Y,Z,4th ,5th) ,Pulse + direction signals
3. TAC2000TB series : Interpolation axes: X,Y,Z linear interpolation; X and Z circular interpolation;
TAC2000TB series : Interpolation axes: X,Y,Z ,4th,5th linear interpolation; X and Z circular interpolation;
Inputs / Outputs:
1.Economic version: TAC2000T series :16 inputs, 16 outputs
2.Standard version: TAC2000TB series : 32 inputs, 32 outputs

Feeding axis function:
1. Minimum command unit: 0.001mm or 0.0001mm can be selected
2. Position command range: ±99999999 × minimum command unit
3. Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; (0.0001mm, the maximum speed is 24m/min)
4. Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;
5. Feeding override: total 16 levels: 0~150%, real-time adjustment;
6. Interpolation mode: linear, arc and spiral interpolation and rigid tapping
7. Auto chamfering
Acceleration and deceleration function:
1. Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
2. Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
3. Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
4. The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
Spindle function:
1. Analog voltage 0V~10V output in two channels, support two-spindle control
2. Spindle encoder feed back in one channel, the resolution of spindle encoder can be set
(0 or 100p/r~5000p/r)
3. Transmission ratio between encoder and spindle is:(1~255):(1~255)
4. Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.
5. Spindle override: total 8 levels: 50%~120%, real-time adjustment
6. Spindle constant surface speed control
7. Tapping cycle/rigid tapping
Tool function:
1. Tool length compensation
2. Tool radius compensation (C type)
3. Tool wearing compensation
4. Tool life management
Precision compensation:
1. Backlash compensation
2. Pitch error compensation in memory type
PLC function:
1. PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
2. PLC program communication download
3. Support PLC warning and PLC alarm
4. Support many PLC programs (maximum 16), the current running PLC program can be selected
5. Basic I/O: input in 14 points/output in 14 points

1.General Purpose Lathe Controller support both A type and B type macro functions,Easily to do some complicated programming.

2.PLC Ladder Programming: PLC ladder is programmable.support PLC ladder software.

3.Universal Lathe Controller support CS Axis Function (3~5 Axis Controller): With servo spindle, Spindle can work as CS axis for spindle indexing and rigid tapping.

4. Various ATC configuration: Support linear tool changer, Electric turret.Hybrid turret.

5. Threading: Support all types of threading commands.